HO scale decoder installs, vol 2 - part 1 (TSG)

10 Aug 2016

TMTV
Rating: 
4.5
Average: 4.5 (6 votes)
Summary: 
35:37 - HO scale decoder installs, vol 2 - part 1 (TSG 2009)
Description: 

FROM TSG MULTIMEDIA - For TMTV members!

In HO DCC Installs Volume 2 part 1, TSG's Dan Cortopassi tackles 4 complex real-world examples of hardwire DCC installs in HO scale locomotives, ranging from a Tsunami sound install to an install with sound, front/rear headlights, numberboards, roof beacon and ditch lights all in one HO loco!

Part 2 gets into four more advanced hardwire installs in both steam and diesel:
Watch Vol 2 - part 2

In this series, TSG shows the typical issues you’ll likely encounter while installing your own decoders. There are both steam locomotive installs and an assortment of diesels with lights and sound, so there should be something for everyone.

This video mentions a bonus library - click here to access.

Here's the complete DCC Decoder install series from TSG:

- HO DCC Decoder installs, vol 1, part 1
- HO DCC Decoder installs, vol 1, part 2

- HO DCC Decoder installs, vol 2, part 1 (this video)
- HO DCC Decoder installs, vol 2, part 2

- N DCC Decoder installs, vol 1, part 1
- N DCC Decoder installs, vol 1, part 2

NOTE: This video was produced in 2009 using standard definition video. We have upsampled it to HD, but the video appears soft and may have a few moire patterns occasionally. Even so, the techniques illustrated are quite valuable -- we believe you will agree this video series, even at the old lower resolution, is packed with helpful install examples.

This video is produced by TSG Multimedia. If you would like to get this video as download-to-own, or to check out their other videos, please see the TSG website or the TSG free monthly podcast on YouTube.

NOTE: TMTV members can use the discount code found here to save 15% on TSG DVDs and downloads!

•Vol 2 - Part 1, all chapters (~36 minutes) ...


INDIVIDUAL CHAPTERS ...

•Introduction to HO DCC decoder install volume 2 (1:32)

•Chapter 1 - Atlas SD-26 diesel Tsumani hardwire with working beacon (10:28)

•Chapter 2 - Proto2000 GP60 Digitrax board-replacement + Soundbug hardwire (8:51)

•Chapter 3 - Bachmann Climax Soundtrax Micro-Tsunami hardwire install (8:08)

•Chapter 4 - Kitbashed SD45R Loksound + function decoder hardwire install (6:38)

PART 2 ...
Part 2 has four more complex installs, plus a second all-new sound decoder bake-off comparison.

CONTINUE WATCHING PART 2 ...
Watch part 2

Comments

Not bad but it's a little bit too much saying what you did, not how you did it. Could use a some more depth.

Not bad but it's a little bit too much saying what you did, not how you did it. Could use a some more depth.

Did you see the extra depth of the supplementary material? We think that may be what you're looking for.

This video mentions a bonus library - click here to access.

Indeed. Not to mention that some things cannot be shown due to time and space constraints. The information in the link was created specifically for people who wanted to know even more than we could show on the video. Thanks for posting the link!